A video I made on how to make a sign
Moderator: Site Management Team
A video I made on how to make a sign
I made a video on how I make signs without any proper CAD software. The software used is Inkscape. https://youtu.be/J8karfi9rZo
"Would You Like A Jelly Baby?"
- Conekicker
- Member
- Posts: 3769
- Joined: Sat Dec 10, 2005 22:32
- Location: South Yorks
Re: A video I made on how to make a sign
Very impressive, although CAD is waaaaaaaaaaay faster!
Patience is not a virtue - it's a concept invented by the dozy beggars who are unable to think quickly enough.
Re: A video I made on how to make a sign
Speed comes at a cost though!
"Would You Like A Jelly Baby?"
- Conekicker
- Member
- Posts: 3769
- Joined: Sat Dec 10, 2005 22:32
- Location: South Yorks
Re: A video I made on how to make a sign
A CAD sign design programme quickly pays for itself in saved man hours.
Patience is not a virtue - it's a concept invented by the dozy beggars who are unable to think quickly enough.
- Nathan_A_RF
- Member
- Posts: 726
- Joined: Sat Apr 05, 2014 12:53
- Location: East Sussex/Southampton
- Contact:
Re: A video I made on how to make a sign
Nice video! By coincidence I have also gotten into Inkscape sign design, as can be seen here
I recommend using the alignment features for images and block destinations, as they are very handy.Re: A video I made on how to make a sign
I have it so snapping is on which makes things easier and quicker. Also scaling everything to an x height of 100mm is easier as well.
"Would You Like A Jelly Baby?"
- Patrick Harper
- Member
- Posts: 3212
- Joined: Sat Jan 16, 2010 14:41
- Location: Wiltshire